Click on each item for full specification.

RECLAIMED FLOORING PRICES

Old Yellow Pine Boards. Prices from:£64.30

OLD YELLOW PINE BOARD

GRADE: Standard

THICKNESS: 20.0mm T/G EM No Microbevel.
WIDTH: Random: 120 - 220mm
LENGTHS: 1500 - 3500mm (80%+)

Produced from Old Roof trusses mainly from Victorian Industrial buildings. Boards are sawn to thickness and planed on 4 sides to 20mm thickness

Old Pine Roofboards Remachined. Prices from£64.30

OLD PINE ROOFBOARDS REPLANED

GRADE: Standard

THICKNESS: 20.0mm SE.
WIDTH: Fixed: 120 - 180mm - Depends on Availability
LENGTHS: 1500 - 4000mm (80%+)

Old Roof/Sarking boards from industrial warehouses generally. Denailed and planed to thickness on one face. Nice colour. Has original nail holes.

Reclaimed Pitch Pine Resawn & Remachined: 120mm+£ 52.65

RECLAIMED PITCH PINE REMACHINED BOARDS

GRADE: Prime/Standard Mix

THICKNESS: 20.0mm T/G EM 1.2mm Microbevel.
WIDTH: Random: 120 - 170mm
LENGTHS: 2000 - 3500mm (80%+)

Sawn from old Victorian Industrial Roof Timbers. Pitch Pine is harder and denser than yellow pine.

Reclaimed Pitch Pine Resawn & Remachined: 170mm+£ 56.65

RECLAIMED PITCH PINE REMACHINED BOARDS WIDE

GRADE: Prime/Standard Mix

THICKNESS: 20.0mm T/G EM 1.2mm Microbevel.
WIDTH: Random: 170 - 220mm
LENGTHS: 2000 - 3500mm (80%+)

Sawn from old Victorian Industrial Roof Timbers. Pitch Pine is harder and denser than yellow pine.

Uncut French Railway Boards£59.00

RECLAIMED OAK RAILWAY BOARDS UNCUT

GRADE: Mixed

THICKNESS: 42 - 46mm random
WIDTH: 150 - 190mm (total inc.halflap joint)
LENGTHS: 2600 - 2700mm (approx 2400 between 2 small bolt holes 60mm from each end)

Sawn Old French Oak Railway Boards£85.80

SAWN RECLAIMED RAILWAY OAK BOARDS

GRADE: Standard

THICKNESS: 17 - 21
WIDTH: Mixed: 125 - 180 (165mm average)
LENGTHS: 2600 - 2700mm (approx 2400 between 2 small bolt holes 60mm from each end)

Selected Sawn Old French Oak Railway Boards£98.50

SELECTED SAWN RECLAIMED RAILWAY OAK BOARDS

GRADE: Prime/Standard Mix

THICKNESS: 17 - 21mm Random
WIDTH: Mixed: 125 - 180 (165mm average)
LENGTHS: 2600 - 2700mm (approx 2400 between 2 small bolt holes 60mm from each end)

Selected for best smoothest face, regular surface and least blemishes.. Sawn to half thickness.

Trade discounts available for larger quantities.

T/G: Tongue and Groove Joints.

KD: Kiln Dried.

EM: Ends of boards T/G jointed

All above prices are subject to VAT at the standard rate for UK purchases.